Description
• Floating outputs on spring terminal block with levers for 2,5 mm²
(AWG 12) wires.
• Balanced-output voltage adjustable from ±10 to ±15 V
+15 V output
• Regulation : < 20 mV for a load variation from 0 to 100%.
< 2 mV for a line variation from -10 to +10%.
• Ripple : < 3 mV rms including :
< 3 mV peak to peak of the signal at 100 kHz
< 5 mV peak to peak of the signal at 100 Hz
< 12 mV peak to peak of switching spikes
-15 V output
• Regulation : < 20 mV for a load variation from 0 to 100%.
< 2 mV for a line variation from -10 to +10%.
• Ripple : < 3 mV rms including :
< 4 mV peak to peak of the signal at 330 kHz
< 4 mV peak to peak of the signal at 100 Hz
< 15 mV peak to peak of switching spikes
24V Output (Adjustable from 20 to 30V)
Available between output + and –
•Regulation : < 35 mV for a load variation from 0 to 100%
< 10 mV for a line variation from -10 to +10%.
•Ondulation : < 3 mV rms including:
< 8 mV peak to peak of the switching signal
< 5 mV peak to peak of the signal at 100 Hz
< 15 mV peak to peak of switching spikes.
Indicators
• Green power-on LED indicator.
• Overheat or overcurrent red LED “status” indicator
Current +15 V (alone)
• I max : 5,5 A in short circuit condition
5 A from 10 to 12 V ; 4 A at 15 V
Current -15 V (alone)
• I max : 2,1 A in short-circuit condition
2 A from 10 to 15 V
Current 24V (Adjustable from 20 to 30 V)
I max : 2,1 A in short-circuit condition
2 A from 20 to 30 V
Power
• Max output power : 60 W.
• I max ±15 V : 2 A
Protections
• Against short-circuits by current limit.
• Against overcurrent on primary circuit by fuse.
• Against overtemperature, by thermal shutdown.
• Cover on input output terminal block.
Other specifications
• Safety : Class II, Safety Extra Low Voltage (SELV), complies with EN 61010-1, EN 61010-2-201 and EN61368-1.
• EMC : Complies with EN 61000-6-2 and EN 61000-6-4.
• Overvoltage Category : II ; Pollution Degree : 2.
• Installation altitude : < 2000 m.
• Protection level : IP 30.
• Operating temperature : from -25 to +60 °C ; derating : 1 W/°C from +40 °C
• Input voltage : 190 to 264 Volts, 50-60 Hz.
• Mains input : spring terminal block with levers for 2,5 mm², (AWG 12) wires.
• Power consumption : 78 W max.
• Dielectric strength : 3000 VAC from input to output.
• Presentation : modular polycarbonate case (6 x 17.5 mm) screenprinted.
• Mounting : Clips package integrated in modular case for DIN rails profile 35×7,5 mm or 35×15 mm.
Removable wall mouting integrated to the case for 4 mm screws
