Description
Channels CH1 and CH2 (MASTER AND SLAVE) CH3
Independent Tracking Series Parallel Variable
Output Voltage 2 x 0 – 32 V ± 0 – 32 V 0 – 64 V 0 – 32 V 1 – 15 V Output current 2 x 0 – 6 A ± 0 – 6 A 0 – 6 A 0 – 12 A 3 A / 1A
Protections
• Against short-circuits, by current regulation.
• Against overtemperature by fan and thermal circuit-breaker.
• Against overcurrent on main input, by internal fuses.
Various and functions
• Dispaly :Graphic LCD 128 x 64 pixels with white backlight.
Visualization of all parameters (CV, CC, RMT, etc….)
• Memory : 16, including 15 configurable.
• OVP/OCP :Against overvoltage and overcurrent, adjustable from 0 to maxi.
• Functions :6 available on CH1 & CH2 in U or I (Arbitrary, square, rising and falling periodically ramp, rise or fall time single shot).
Time adjustement from 10 ms to 50 mn.
• Remote sensing :4 wires mode on the back-side’s terminal blocks.
Only on CH1&CH2 ; correction of the voltage drop in the wires : 2 V
• Standby : outputs, enable/disabled and standby of the power supply
Interfaces
All the interfaces are insulated of the output (150 VDC max).
• USB and RS485 are standard. *RSETHER option : adapter kit to ETHERNET.
• LabVIEW™’s drivers and executable are in standard.
• 0 – 10 V command : for U & I for CH1 or U for CH1 & CH2 by direct input
0-10 V or 10 kW adjustable potentiometer/resistance.
• ON/OFF command : configurable on 3 channels.
• Command inputs : in the back side on disconnect scribe terminal blocks.
Other specifications
• Safety : Class I, enhanced safety between mains input and outputs.
Complies with EN 61010-1, CAT II.
• CEM : Complies with EN 61326-1 and EN 55011.
• Input voltage : 220-240 Volts ±10%, 50/60Hz.
• Mains input : socket C14 with C13 2 poles + earth cable removable
• Power consumption : 495 W maxi.
• Efficiency : > 80% of the maxi powerful.
• Operating temperature : +5 to +40 °C.
• Coefficient of temperature /°C : 0.01% for the voltage and the current.
• Voltage on the earth : 150 VDC Max.
• Presentation : Front-panel with sensitiv keypad, rear-panel withhandle and cord storage area, metallic case with epoxy finish.
