Description
Voltage • Floating outputs on 4 mm safety sockets.
• Output voltage : adjustable from 10 to 15 V with fine adjustment.
• Regulation : < 70 mV for a load variation from 0 to 100%.
< 1 mV for a line variation from -10 to +10%.
• Ripple : < 3 mV rms including :
< 8 mV peak to peak of the signal at 100 kHz
< 3 mV peak to peak of the signal at 100 Hz
< 50 mV peak to peak of switching spikes
• Internal resistance : < 4 mΩ.
• Hold-up time : 25 ms at half load and 12 ms at full load (190 V line input).
• Indicator : green power-on LED indicator.
overheat or overvoltage red LED indicator.
Current
• Max I : 25,5 A in short circuit condition.
25 A from 10 to 12 V, 20 A at 15 V.
Power
• Output power : 300 W from 12 to 15 V, 250 W to 10 V.
Paralleling mode
• Load share controller (1 wire) on 2 mm safety sockets.
Protections
• Against short circuits by current regulation.
• Against overcurrent on main input, by internal fuse.
• Against output overload by voltage limiting to 17 V.
• Against overheat by controlled fan
Other specifications
• Safety : Class II, double insulation, complies with EN 61010-1.
• EMC : Complies with EN 61326-1, performance criteria B, and EN 55011, ISM Group I, Class B.
• Protection level : IP 30.
• Input voltage : 190 to 264 Volts, 50/60 Hz.
• Mains input : C8 socket with CEI320 C7 removable cable (2 poles double insulation).
• Power consumption : 360 W max.
• Power factor : 0.99 (built with PFC).
• ON/OFF control : toggle switch
• Dielectric strength : 3000 VAC between input and output.
• Presentation : metal case with epoxy finish.
