Description
Voltage
• Floating outputs on 4 mm safety sockets.
• Output voltage : adjustable from 10 to 15 V.
• Regulation : < 25 mV for a load variation from 0 to 100%.
< 1 mV for a line variation from -10 to +10%.
• Ripple : < 3 mV rms including:
< 5 mV peak to peak of the signal at 100 kHz
< 5 mV peak to peak of the signal at 100 Hz
< 40 mV peak to peak of switching spikes
• Hold-up time : 25 ms at half load and 12 ms at full load (190 V line input).
• Indicator : green power-on LED indicator.
“status, output fault” red LED.
Current
• Max I : 10,5 A in short circuit condition.
10 A from 10 to 15 V
Power
• Max output power : 150 W.
Protection
• Against short circuit by current limit.
• Agains overcurrent on main input, by fuse.
• Against overload by voltage limit to 17 V
Other specifications
• Safety : Classe II, double insulation, according to EN 61010-1.
• EMC : Complies with EN 61326-1, performance criteria B, and EN 55011, ISM Group I, Class B.
• Protection level : IP 30.
• Input voltage : 190 to 264 Volts, 50/60 Hz.
• Mains input : C8 socket with CEI320 C7 removable cable (2 poles double insulation).
• Power consumption : 170 W max.
• Power factor : 0.99 (built with PFC).
• ON/OFF control : toggle switch
• Dielectric strength : 3000 VAC between input and output.
• Presentation : metal case with epoxy finish.
