Description
DC outputs
• Floating outputs on 4 mm safety sockets.
• Two switchable outputs : 6 Volts or 12 Volts.
• Accuracy : ± 1%
• Regulation : < 20 mV for a load variation from 0 to 100%.
< 5 mV for a 10% line variation.
• Ripple : < 3 mV rms including :
<3 mV peak to peak of the signal at 100 kHz
<4 mV peak to peak of the signal at 100 Hz
<12 mV peak to peak of switching peak
• Hold up time : 25 ms at half load and 12 ms at full load (190 V line input).
• Indicator : green power-on LED indicator.
Current
• Max I : 5 A at 6 or 12 V output.
• Idc : 5,5 A.
Protection
• Short circuit protection by current limiting,
• Overcurrent protection on source by fuse on main input
AC outputs
• Floating outputs on 4 mm safety sockets.
• Two outputs with common point.
• Voltages : 6 Volts and 12 Volts + or – 5%.
• No-load voltage 10% maximum.
• Indicator: green power-on LED indicator.
Current
• Max I : 5 A at 6 V or 12 V output.
Protection
• Short circuit and overcurrent protection by auto-reset thermal circuit-breakers.
Precautions
• Power supply max. power is of 120 Watts
• The AC and DC circuits can be used simultaneously
Other specifications
• Safety : Class II (double insulation), Safety Extra Low Voltage (SELV) outputs.
Complies with EN 61010-1, overvoltage category II, pollution degree 2.
• EMC : Complies with EN 61326-1, performance criteria B, and EN 55011, ISM Group I, Class B.
• Input voltage : 230 V ±10%, 50/60 Hz.
• Mains input : C8 socket with CEI320 C7 removable cable (2 poles double insulation).
• Power consumption : 145 VA max.
• Protection : against overcurrent at the input by fuse
• Protection level : IP 30
• Dielectric strength : 3000V between input to output.
• Presentation : Metal case with epoxy finish
